In Stock
SKU: 13147
TAURING DELTA 50 CNC - S 3 Roll CNC profile bending machine for round and assymetrical profiles

Machine : Tauring Delta 50 CNC – S

Stock Nr : 13147

Year of Manufacture : 2005

Condition :New 8 hours of operation

Control : CNC 2 axis


Driving Rolls, standard set

8 R.P.M.

50 mm Shaft Diameter

High-Quality, Italian Build

Equipped with the Tauring CNC-S (Touchscreen CNC Control)

LED Display for Digital Readout of Top Roll Position

Includes Interchangeable Universal Tooling

114.3 mm Standard Shaft Working Length

Weighs Approximately 620 Kgs

Machine Dimensions: 1.040 x 1.350 x 1.500 mm


Round Tube: 75 mm x 2,29 mm with a 1.420 mm Minimum Radius

Solid Round: 54,6 mm with a 914 mm Minimum Radius

Square Tube: 57 mm x 3.0 mm with a 914 mm Minimum Radius

Angle (Leg-Out): 57 mm x 9.9 mm with a 711 mm Minimum Radius

Flat Bar (Easy Way): 101 mm x 25 mm with a 304 mm Minimum Radius

T-Channel (Easy Way): 80 mm x 9.53 with a 406 mm Minimum Radius

Pipe: 50.8 mm  Sch. 40 Pipe (2.375" O.D.)

Rectangular Tube (Easy Way): 76.2 mm x 38 mm x 3 mm with a 162 mm Minimum Radius

Solid Square: 38.1 mm x 38.1 mm  with a 1000  Minimum Radius

Angle (Leg-In): 57.1 mm x 9.9 with a 711 mm Minimum Radius

Flat Bar (Hard Way): 76.2 mm x 12.7 mm with a 914 mm Minimum Radius

T-Channel (Hard Way): 80 mm x 9.5 mm with a 406 mm Minimum Radius


Tauring Delta Series of ring rolling machines are pyramid style with the added features of its interchangeable bottom rolls. This gives maximum flexibility with its wide range of accessories available for this machine, these allow for a minimum of deformation while bending.

Pyramidal bending machine, 3 driving rolls with adjustable center-distance.
The top roll is hydraulically adjustable whereas the lower rolls are adjustable in three different positions.
The adjustable center-distance is very important for the profile bending with different shapes and structures.
For example, the wide position is suitable for the bending of rectangular and square tubular profiles or special profiles for window frames with close section. The wide center-distance position allows using a fairly wide bending radius by making the bending easier and avoiding the collapse.

Delta 50 CNC-S  control

The narrow position is suitable for slim and asymmetric profiles. In this case, the deformation is better held in and makes the material feeding easier in every condition thanks to the specific pressure of the bending roll to the material.

The middle center-distance are more used for the round tube bending because it is possible to obtain very small radii without ovalization.

The geometry of this machine allows bending a wide range of profiles, especially in window frames but also in carpentry and in many other productions.